搜尋結果
2024年6月27日 · The industry standard for sealing joints in green or new concrete is 28 days, however with the Sikaflex+ range of products, joints can be filled after a 24 hour cure. The Sikaflex+ range can also be applied on concrete that is wet, one hour after the water source has stopped.
2024年6月26日 · Yes, you can add another layer on top of the existing 2 inch layer. You must prepare the floor and use SikaLevel Primer before the second application.
2024年7月9日 · Posted July 9, 2024 by Sika Expert. If the joint is deep or very narrow (past the 1/2 inch depth limitation), the sealant will travel down pushing air out. Most bubbles will pop but if they reach the surface when the sealant is "skinning" over, they will not burst.
4 天前 · Sikaflex Crack Flex Sealant is textured while Sikaflex Self Leveling Sealant has a smooth finish. Sikaflex Self Leveling Sealant is designed for joint applications while Sikaflex Crack Flex Sealant is more suitable for cracks. Sikaflex Crack Flex Sealant is not suitable for sloped areas.
4 天前 · Yes No. Sika recommends that the product should be used in hard natural stone, solid rock and solid masonry since clay is a weak substrate. Please follow the anchoring instructions on the cartridge.
3 天前 · Yes, you can use Sikaflex Crack Flex Sealant for your application. Please note that if the hydrostatic pressure is great, the sealant may fail. This would be the result with any sealant. The minimum depth and width requirement of the crack must be at least 1/4" x 1/4".
2024年7月4日 · Sika® PostFix® Fence Post Mix must be conditioned between 65° - 75° F for at least 2 hours before it is used. Since the product cures with a chemical reaction, the hotter the A and B components are, the faster it will react. It is always best to let the product cool down to application temperatures.
