搜尋結果
2024年5月16日 · The industry standard for sealing joints in green or new concrete is 28 days, however with the Sikaflex+ range of products, joints can be filled after a 24 hour cure. The Sikaflex+ range can also be applied on concrete that is wet, one hour after the water source has stopped. No standing water can be present in the joint.Industry standards usually recommend a completely dry joint.
2024年5月14日 · To apply, carefully push the backer rod into the joint with a blunt tool and cut to the desired length. If necessary, use the blunt tool or roller to secure the backer rod into the joint. Joint width to depth ratio should be 2 to 1 with a minimum depth of 1/4” or a maximum depth of 1/2”.
2024年5月11日 · Posted May 11, 2024 by Sika Expert. The Sikaflex+ products can be applied to green/new concrete joints after a 24 hour cure. This is significant because the industry standard is 28 days. It can also be applied on concrete that is wet, you must wait 1 hour after the water source has stopped. No standing water in the joint can be present.
2024年5月8日 · Now, we will look at Sika PRO Select’s innovative solutions to anchoring projects, the Sika Anchorfix-1 and Sika Anchorfix-2 adhesives. While they both provide the highest quality anchoring, users should be aware of the similarities and differences between the two when choosing the desired outcome of a project.
2024年5月16日 · Sikaflex+ Self Leveling Sealant and all of Sika's polyurethane sealants will bond to themselves. The surface of the sealant must be clean. Please allow the product to cure for 3 to 5 days. It will cure to a flexible and elastic consistency. After, you can wipe the surface with water and a clean rag to remove any debris on the sealant. Once the sealant is dry, reapply the second layer. If the ...
2024年5月15日 · Sikaflex Crack Flex Sealant is textured while Sikaflex Self Leveling Sealant has a smooth finish. Sikaflex Self Leveling Sealant is designed for joint applications while Sikaflex Crack Flex Sealant is more suitable for cracks. Sikaflex Crack Flex Sealant is not suitable for sloped areas.
2024年5月15日 · Sikaflex+ Self Leveling Sealant can be used to fill in cracks in a concrete driveway. The sealant can be placed into service after it is fully cured, typically 3 to 5 days. The driveway must be flat and contain no slopes. Sika recommends using oil, water, and rubber based paints but it is always best to test a small, inconspicuous area for compatibility. Do not use silicone-based paints or ...
