搜尋結果
2.Type your model number in the field Enter your model number. 3.ClickSearch. 4.For Step 1: Select OS Family, select your operating system type. 5.For Step 2: Select OS Version select your specific operating system. 6.ClickSearch. 7.Click the name of the file that you would like to download.
Download Brother iPrint&Scan from the Brother website https://support.brother.com. Click here for instructions on how to navigate to our downloads page. 2. Double-click on the downloaded iPrintScan setup file. 3. Click Install. 4. Once the installation is complete, click Launch. 5. Place a check next to I agree above End-User License Agreement ...
Follow the below steps to search by Model Name: 1. Click here to access the Brother Solutions Center. 2. ClickManuals. 3.Type your model number in theSearch by Model Name box and clickSearch. - Open a Manual by clicking onDownload. Follow the below steps to Search by Category:1.
1. Download the Printer Driver. Open an Internet browser and browse to https://support.brother.com. Click here for download instructions. 2. Once you download the driver, browse to the location where it is saved and double-click on the downloaded printer driver file. 3. Click the Browse button to change the unzip folder location.
The WLAN () icon on the LCD appears in blue. For RJ-3050Ai/3050: Press and hold the power () button to turn on the printer until the Wi-Fi indicator flashes in blue. Connect the printer and computer with a USB cable. Start the Printer Setting Tool on your computer, and click the [Communication Settings] button.
Reset the Brother device's network card and reconnect it to your wired or wireless network based on the device's specifications. After, try searching for your machine again. - If the device is found, make a note of the IP Address and then go to step 4. 4. Add a TCP/IP port to the printer driver: How to add a TCP/IP port. a.
Follow the steps below to download software, drivers or utilities: 1. Click here for the Brother Solutions Center. 2. Click Downloads. 3. Do one of the following: - Type your model number in the field Search by Model Name: and then click Search. - Browse to your Product Category → Product Series → Model Name.
Download and install a printer driver. Procedure. 1. Download the Add Printer Wizard Driver or Printer Driver from https://support.brother.com. 2. Once the driver has been downloaded, you will need to extract it. How to extract the printer driver. a. Double-click on the file that you downloaded.
On your printer, press the [Menu], [ ] button to select the [WLAN] menu, and then press the [OK] button. Press the [ ] button to select the [Mode] menu, and then press the [OK] button. Select [Direct/Infra], and then press the [OK] button. Next, you need to add the printer to the computer. Click here to see the steps.
Press or to select your Encryption Type: TKIP or AES and then press OK. j. Enter the WPA key and then press OK. Go to step 7. 5. Press or to display your network name and then press OK. If your network has an Open System and does not use a network key, then the machine will now try to connect. Go to step 8.
