搜尋結果
SikaHyflex®-407 EverFlash Universal is a one-component, hybrid technology, non-sag, flexible, flashing and weather barrier sealant designed for primerless adhesion to the most challenging substrates found in the building envelope such as peel & stick window and flashing membranes. Meets ASTM C920, Type S, Grade NS, Class 12.5, use NT, G, A, O, M.
Sikaflex®-1c SL is a single component, self-leveling, premium-grade polyurethane sealant with an accelerated curing capacity. Meets Federal Specification TT-S-00230C, Type I, Class A. Meets ASTM C-920, Type S, Grade P, Class 25, use T, M, A, G, I.
- 254KB
- 4
Excellent for moving joints in vertical applications. Suitable for use between similar as well as dissimilar materials. Typical applications include joints in concrete panel and wall systems, around window and door frames, reglets, flashing etc. Exceptional sealant choice for high-rise façade applications where high movement capability is required.
- SUBSTRATE PREPARATION
- Removal
- BASIS OF PRODUCT DATA
Clean all surfaces. Joint walls must be sound, clean, dry, frost-free, and free of oil and grease. Curing compound residues and any other foreign matters must be thoroughly removed. A roughened surface will also enhance bond. Install bond breaker tape or backer rod to prevent bond at base of joint.
Use personal protective equipment (chemical resistant gloves/ goggles/clothing). Without direct contact, remove spilled or excess product and placed in suitable sealed container. Dispose of excess product and container in accordance with applicable environmental regulations.
Results may differ based upon statistical variations depending upon mixing methods and equipment, temperature, application methods, test methods, actual site conditions and curing conditions.
Capable of +50 % joint movement. Chemical cure allows the sealant to be placed in joints exceeding ½ in. in depth. High elasticity with a tough, durable, flexible consistency. Exceptional cut and tear resistance. Exceptional adhesion to most substrates
Sika Thorolastic®-750 is a water-based, high-build, elastomeric, 100% acrylic waterproof coating for above-grade concrete, masonry, stucco, and EIFS. USES. Exterior. Vertical surfaces. Above grade. Protecting and waterproofing. Substrates. Concrete. Masonry. Cement Plaster. Stucco. EIFS. Over Existing Coatings.
SikaQuick®-1000 is a one-component, rapid hardening, early strength gain, cementitious, patching mortar for concrete. SikaQuick®-1000 LD is a low dust version of this formula. USES. On grade, above grade and below grade concrete conditions. Highway overlays and repairs.
