搜尋結果
7.1 Sika AnchorFix®-3001 adhesive is identified in the field by labels on the cartridge and packaging, bearing the company name (Sika Services AG), product name (Sika AnchorFix®-3001), the batch number, the expiration date, and the evaluation report number (ESR-3608). 7.2 Threaded rods, nuts, and washers are standard elements, and must ...
- 1MB
- 28
Rinse skin with water/shower. P304 + P340 + P310 IF INHALED:99981231160000-08'00'emove person to fresh air and keep comfortable for breathing. Immediately call a POISON CENTER/doctor. P305 + P351 + P338 + P310 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do.
- PRODUCT DESCRIPTION
- USES
- SURFACE PREPARATION
- APPLICATION
- LIMITATIONS
- BASIS OF PRODUCT DATA
SikaQuick® Patch is a two-part, pre-proportioned cementitous mix which when applied, produces a rapid curing repair patch. It has been specifically formulated and packaged to be an easy, mix-in-the-bag, highstrength product. SikaQuick® Patch is based upon Sika’s proven cement technology.
Bonds to concrete Horizontal spall repairs Concrete basement floors Concrete driveways Concrete patios Concrete side walks and much more
Remove all deteriorated concrete, dirt, oil, grease, and all bond-inhibiting materials from surface. Preparation work should be done by high pressure water blast, scabbler, or other appropriate mechanical means to obtain an aggregate-fractured surface with a minimum CSP 3 surface profile or greater. Ensure there are no curing compounds or other con...
After mixing, cut one of the bag’s corners and pour mixed material in the hole/spall. The material will settle into the hole/repair. Smooth it with a wide putty knife to get a smooth/flat finish.
Do not apply on frozen or frost covered substrates. Low temperatures or high humidity will extend curing time. Low temperatures will cause a thicker consistency. Do not allow stored product to freeze. Do not apply on vertical surfaces.
Results may differ based upon statistical variations depending upon mixing methods and equipment, temperature, application methods, test methods, actual site conditions and curing conditions. OTHER RESTRICTIONS
SikaControl® AIR-160 formula provides superior controllability of the air content in air-entrained concrete. SikaControl® AIR-160 increases concrete’s durability, making it more resistant to the damaging effects of freezing and thawing, while improving workability and reducing bleeding.
SikaSwell® A is an acrylic sealing profile which swells in contact with water to seal all types of joints and penetrations in concrete. It has a rectangular profile and is available in several sizes.
Sika USA - Protecting the past. Building the present. Innovating for the future.
Bonding Timber Components. Application Guide PDF - 136 KB (en) Bonding and Sealing Mineral Glass. Application Guide PDF - 1 MB (en) Bonding and Sealing Plastic Windows Application Guide. Application Guide PDF - 1 MB (en) Bonding of Rub Rails and Fenders. Application Guide PDF - 162 KB (en) Sealing Areas Exposed to UV Radiation.
