雅虎香港 搜尋

搜尋結果

  1. 終極運動設計. 四十年不妥協的卓越追求,滿足世界級運動員的需要。. 而 Oakley的 Jawbreaker™ 更將創新精神推至功性能的頂峰,成為終極的運動設計。. 到店內選購. Your browser does not support the element.

  2. 作為世界頂級單車手,在第104次環法單車賽中史詩式完成3540公里旅程,我們挑戰你的極限,參與Jawbreaker™ 101挑戰突破自己的極限。. 挑戰 於24小時內完成101公里單次騎程,上傳/同步上傳到Strava。. 所有挑戰選手將獲得完成者數碼徽章,並進入環法版Jawbreaker ...

    • Oakley Lens Cleaning Information
    • Fast Jacket Lens Changing Instructions
    • Flak Jacket Lens Changing Instructions
    • Half Jacket Lens Changing Instructions
    • Racing Jacket & Split Jacket™ Lens Changing Instructions
    • Radar Lens Removal Instructions
    • Radar Lock Lens Removal Instructions
    • Styleswitch Lens Removal Instructions

    ALL OAKLEY LENSES

    To help maintain the High Definition Optics® (HDO®) of Oakley lenses, your new eyewear comes with a specially-woven electrostatic Microclear™ bag for cleaning and storage. Using it will preserve the superior optical quality of Oakley's pure Plutonite® lenses. Hand wash and air-dry the Microclear™ bag regularly.

    IRIDIUM® LENSES

    Oakley Iridium® lens coating is engineered to reduce glare and improve contrast. An array of available tints allows the wearer to balance light transmission in any light condition. The 12-micron jacket of Iridium® must be treated with special care to avoid scratching. It is only recommended to use an Oakley Micro Bag or Oakley Lens Cleaning Kit to clean Oakley lens, do not use any other solvents, chemicals or third party cleaning kits because they have not been tested on our lenses and can po...

    REPLACEABLE FRAME ACCESSORIES

    Frame accessory kits are available for some Oakley® eyewear styles. Do not attempt to remove or replace any other eyewear parts as this will void its warranty.

    FastJacketTM sunglasses were built with Switchlock Technology™ , meaning changing lenses to suit your environment is as easy as flipping a switch. Here's how:

    Lens Removal

    INSTRUCTIONS: 1. Place index finger of one hand into nose bridge and place thumb, of same hand, on top of frame as shown; while holding lens with other hand. 2. Flex nose bridge with index finger towards you while pushing top of the frame down with thumb as shown. 3. With opposite hand, pull lens out of groove.

    Lens Installation

    INSTRUCTIONS: 1. Hold frame and lens as shown and slide outer lens tab into frame. 2. Align inner lens tab in frame groove and slide lens gently up into lens groove. 3. Hold lens firmly and slide the thumb of opposite hand along top of frame until inner lens tab snaps firmly into place.

    Lens Removal

    INSTRUCTIONS: 1. Grip the frame temple with one hand and the lens with the other. 2. Pull the lens tab out of the frame temple. Remove the lens.

    Lens Installation

    INSTRUCTIONS: 1. Grip the frame and lens. Fit the outer lens tab. 2. Align the inner lens tab with the groove in the nose bridge. 3. Holding the lens firmly, slide your thumb across the top of the frame until the inner lens tab snaps into the groove in the nose bridge.

    Lens Removal

    INSTRUCTIONS: 1. Replace one lens at a time. 2. Grasp the nose pad near the bottom. 3. Rotate the nose pad up. 4. Grasp the lower jaw and rotate it down. 5. Remove the lens.

    Lens Installation

    INSTRUCTIONS: 1. Insert the replacement lens. 2. Close the jaw. Rotate the nose pad down and snap it into the locked position.

    M2, M FRAME & PRO M FRAME LENS REMOVAL INSTRUCTIONS

    1. Holding the center of the frame, pull the lens out from the middle. 2. Squeezing the center of the frame, pop up one corner of the frame and lift it away from the lens.

    INSTRUCTIONS: 1. With two fingers carefully pinch the two nose bridge tabs inward. 2. Then push the nose bridge towards top of sunglasses until lens releases from top. 3. Then pull lens down and out.

    Lens Removal

    INSTRUCTIONS: 1. Locate lock latch on the inside surface of the left temple. 2. With index finger and thumb, hold lock and door. 3. Push lock and rotate door away from the lens (shown with arrows). 4. Rotate temple and door as you're pushing the lock. 5. Push nose bridge inwards to release bottom part of lens. 6. Rotate lens towards the bottom to fully release lens.

    Lens Installation

    INSTRUCTIONS: 1. Insert top corner of lens in the lens groove corner (shown with arrows). 2. Rotate lens and position it fully on the lens groove. 3. Push nose bridge onto lens towards the outside. 4. Rotate door closed.

    STYLESWITCH™ sunglasses were built with Switchlock Technology™, meaning changing lenses to suit your environment is as easy as flipping a switch. Here's how

  3. 看真這條路將會帶你去哪裡 幫你看真公路紋理的細微變化,快速發現容易構成危險的石頭和坑洞。 將願望清單的電郵發送給我 點擊「發送」表示我同意接收Oakley的郵件,包括:最新產品資料、獨家優惠及活動邀請

  4. 這是我們革命性的新鏡架合適配戴系統,輕易達到完美的合適度,所以,你可以選擇任何你想要的風格,而不是擔心配戴後的感覺。 TruBridge™科技調節鏡架鼻樑位置的寬度和深度,讓你輕鬆適應,而永遠不用再放棄你喜歡的風格。

  5. 將願望清單的電郵發送給我 點擊「發送」表示我同意接收Oakley的郵件,包括:最新產品資料、獨家優惠及活動邀請 將願望清單的電郵發送給我 點擊「發送」表示我同意接收Oakley的郵件,包括:最新產品資料、獨家優惠及活動邀請

  6. PRODUCT OVERVIEW. HSTN (Low Bridge Fit) Matte Black. Oakley ® melds progressive design with heritage features in HSTN, a gender-neutral sunglass with striking modernized circular lenses. HSTN features Prizm™ Lens Technology and a modernized trigger stem (influenced by Oakley’s Razor Blades, an homage to the brand’s past).

  1. 其他人也搜尋了