搜尋結果
Direct-to-Substrate Roofing. Heavy-duty application to structural concrete and wood decks. Protected Membrane Roofing. Seamless, self-flashing installation under extruded polystyrene insulation with stone or concrete paver ballast. Recover Roofing.
- 5MB
- 8
- Waiting / Recoat Times
- SUBSTRATE PREPARATION
- Preparation Work: Concrete - Should be cleaned and
- BASIS OF PRODUCT DATA
- LEGAL DISCLAIMER
Average Substrate and Material Temperature. These set times were determined under laboratory conditions, actual set times may vary based on on-site conditions
Surface must be clean and sound. It may be dry or damp, but free of standing water. Remove dust, laitance, grease, curing compounds, impregnations, waxes and any other contaminants.
prepared to achieve a laitance and contaminant free, open textured surface by blast cleaning or equivalent mechanical means. Steel - Should be cleaned and prepared thoroughly by blast cleaning to white metal finish.
Results may differ based upon statistical variations depending upon mixing methods and equipment, temperature, application methods, test methods, actual site conditions and curing conditions.
KEEP CONTAINER TIGHTLY CLOSED KEEP OUT OF REACH OF CHILDREN NOT FOR INTERNAL CONSUMPTION FOR INDUSTRIAL USE ONLY FOR PROFESSIONAL USE ONLY
- 255KB
- 4
Sikafloor MultiDur ECB is a solid color, textured, resin-rich, seamless, epoxy floor coating. The incorporation of a durable aggregate broadcast and sealed into the surface increases the coating thickness and extends service life. This coating is chemical, abrasion, and impact resistant.
A ready to use, textured concrete patch for repairing small spalls and cracks in concrete. Buy Now. Can be applied up to 1/4 in. thickness. For vertical and horizontal surfaces. Interior/exterior use. Textured to blend with concrete.
Sikaflex®-1c SL is a single component, self-leveling, premium-grade polyurethane sealant with an accelerated curing capacity. Meets Federal Specification TT-S-00230C, Type I, Class A. Meets ASTM C-920, Type S, Grade P, Class 25, use T, M, A, G, I.
Sikadur®-35 Hi-Mod LV is a 2-component, 100 % solids, moisture-tolerant, low-viscosity, high-strength, multipurpose, epoxy resin adhesive. It conforms to the current ASTM C-881, Types I, II, and IV, Grade-1, Class C* and AASHTO M-235 specifications. *except for gel time. Read more +. Super low viscosity.
UltraCure NCF (Natural Cellulose Fabric) single-use wet curing blankets provide constant and thorough hydration while maintaining a 100% relative humidity condition on the slab for a curing period of 7 days resulting in less surface discoloration and a more evenly cured concrete slab.
