搜尋結果
Sikaflex®-1c SL is a single component, self-leveling, premium-grade polyurethane sealant with an accelerated curing capacity. Meets Federal Specification TT-S-00230C, Type I, Class A. Meets ASTM C-920, Type S, Grade P, Class 25, use T, M, A, G, I.
- 254KB
- 4
Sikagard® 550W Elastocolor is a low-VOC, elastomeric, crack-bridging, anti-carbonation, acrylic protective coating. Sikagard® 550W Elastocolor provides protection to reinforced concrete from the ingress of carbon dioxide and other aggressive gasses.
- Waiting / Recoat Times
- SUBSTRATE PREPARATION
- Preparation Work: Concrete - Should be cleaned and
- BASIS OF PRODUCT DATA
- LEGAL DISCLAIMER
Average Substrate and Material Temperature. These set times were determined under laboratory conditions, actual set times may vary based on on-site conditions
Surface must be clean and sound. It may be dry or damp, but free of standing water. Remove dust, laitance, grease, curing compounds, impregnations, waxes and any other contaminants.
prepared to achieve a laitance and contaminant free, open textured surface by blast cleaning or equivalent mechanical means. Steel - Should be cleaned and prepared thoroughly by blast cleaning to white metal finish.
Results may differ based upon statistical variations depending upon mixing methods and equipment, temperature, application methods, test methods, actual site conditions and curing conditions.
KEEP CONTAINER TIGHTLY CLOSED KEEP OUT OF REACH OF CHILDREN NOT FOR INTERNAL CONSUMPTION FOR INDUSTRIAL USE ONLY FOR PROFESSIONAL USE ONLY
SikaTop®-123 Plus is a two-component, polymer-modified, Portland cement-based, fast-setting, non-sag mortar. It is a high performance repair mortar for vertical and overhead surfaces and offers the additional benefit of Sika FerroGard® 901, a penetrating corrosion inhibitor included in its formulation. Read more +.
Sikaflex®-1A is a premium-grade, high-performance, moisture-cured, 1-component, polyurethane-based, non-sag elastomeric sealant. Sikaflex-1a can be used in green and damp concrete applications.
Sikacryl® Ready-Mix Concrete Patch. A ready to use, textured concrete patch for repairing small spalls and cracks in concrete. Buy Now. Can be applied up to 1/4 in. thickness. For vertical and horizontal surfaces. Interior/exterior use. Textured to blend with concrete. Good adhesion. VOC Compliant. Read More add. Available Colors. Gray.
Advantages. Capable of +50 % joint movement. Chemical cure allows the sealant to be placed in joints exceeding ½ in. in depth. High elasticity with a tough, durable, flexible consistency. Exceptional cut and tear resistance. Exceptional adhesion to most substrates without priming. Available in 35 architectural colors.
