搜尋結果
Sika® Aktivator-100 is used to improve adhesion on substrates such as float glass, ceramic screen prints, the cut face of old Polyurethane adhesives and paints. After intensive testing, this activator is also suitable to enhance the adhesion of other Sika sealants and adhesives on non-porous substrates. Seek manufacturer’s advice and perform ...
- Wipe-on, wipe-off with lint-free paper towel
- Solvent-based adhesion promoter
- 5 ─ 40 °C (41 ─ 104 °F)
- Colorless, clear to yellowish
Safety Data Sheet Sika® Aktivator-110 LUM Revision Date 02/01/2022 Print Date 02/02/2022 1 / 13 SECTION 1. IDENTIFICATION Product name : Sika® Aktivator-110 LUM Company name : Sika Corporation 201 Polito Avenue Lyndhurst, NJ 07071 USA
- PRODUCT BENEFITS
- METHOD OF APPLICATION
- FURTHER INFORMATION
- LEGAL DISCLAIMER
Easy to use Enhanced adhesion on a wide variety of non-porous substrates Short flash-off time Transparent
Surfaces must be clean, dry and free from grease, oil, dust and contaminants. Adhesion on substrates may be improved by adding and/or combining pre-treatment pro-cesses such as scuffing and cleaning prior the activator application.
The information herein is offered for general guidance only. Advice on specific applications is available on request from the Technical Depart-ment of Sika Industry. Working instructions issued for a defined ap-plication may further specify technical data contained in this Product Data Sheet. Copies of the following publications are avail-able on r...
Prior to each use of any product of Sika Corpor-ation, its subsidiaries or affiliates (“SIKA”), the user must always read and follow the warnings and instructions on the product’s most current product label, Product Data Sheet and Safety Data Sheet which are available at usa.sika.com or by contacting SIKA’s Technical Service De-partment via email a...
2011年3月17日 · Areas of Application. SikaPower®-4508 is designed as an adhesive / sealant. As an adhesive, it is usually used in combination with spot welding, riveting, clinching and other mechanical fastening techniques to fix the parts until the curing process is completed. Bonding of oily substrates is possible up to an oil amount of 3 g/m.
SikaMonoTop ®412NFG 推荐使用低速(400~600rpm)机械搅拌,当使用机械施工时,可根据搅拌设备的技术性能决定一次搅拌量。. 搅拌前,先将水加入搅拌容器中,边搅拌,边徐徐加入本产品,待所有材料与称重好的水充分润湿后,至少搅拌5分钟直到混合物完全均匀没有结块。. 旗工 ...
