搜尋結果
ProSelect Products. Subfloor Covering. SikaLevel Self-Leveling Underlayment. Gallery. SikaLevel Self-Leveling Underlayment. A one-component highly fluid, durable cementitious underlayment for interior concrete, and cementitious substrates. Buy Now. Levels new and renovates old floors. Can be walked on after 2–3 hours.
- USES
- SURFACE PREPARATION
- Priming
- APPLICATION
- Disposal:
- BASIS OF PRODUCT DATA
Interior floor leveling and smoothing applications where floor coverings are to follow, such as: Institutional - schools, colleges, hospitals, clinics, libraries, galleries, museums Commercial - offices, corridors, hallways, canteens, cafeterias, stores, hotels, restaurants Residential - domestic properties, condominiums and high rise construction
All substrate must be dry, stable, sound and free of all contaminants such as grease, oil, paint, wax, dust, curing and sealing compounds that will interfere with the penetration the primer and the adhesion of SikaLevel®. Careful consideration should be given to the selection of the method of mechanical surface preparation and the timing of applica...
Prime standard absorbent substrates such as concrete and cement with SikaLevel® Primer. This product is not a vapor barrier and will allow free passage of moisture. Follow the directions of the floor covering manufacturer regarding the maximum allowable substrate moisture content and test the substrate prior to installing SikaLevel®.
Pour the mix and spread using a smoothing trowel. Even surfaces are easily achieved using a pin leveler. In higher thickness using a spike roller is recommended. Avoid contact to vertical structures by putting in an edge strip such as foam tape. If a second layer of leveling compound has to be applied, prime the first layer with Sika® Level Primer ...
Empty packaging and dispose of in accordance with federal, state and local waste disposal regulations.
Results may differ based upon statistical variations depending upon mixing methods and equipment, temperature, application methods, test methods, actual site conditions and curing conditions.
- 258KB
- 5
Sikaflex®-1c SL is a single component, self-leveling, premium-grade polyurethane sealant with an accelerated curing capacity. Meets Federal Specification TT-S-00230C, Type I, Class A. Meets ASTM C-920, Type S, Grade P, Class 25, use T, M, A, G, I. Read more +. 1-component, no mixing. Self-leveling, pourable. Accelerated curing.
While primer is still tacky, spread mixed Sikadur®-22 Lo-Mod FS with a 3/16 in. (4.7 mm) notched squeegee. When material levels, broadcast the oven-dried aggregate slowly allowing it to settle in the epoxy binder. Ultimately the broadcast aggregate should be applied to excess at a rate of 2 lb./ft2 (0.9 kg/m2) Remove excess broadcast aggregate ...
Buy Now. Ready to use, no dilution required. Must be used with Sika Self-Leveling Underlayment. Prevents water loss from the underlayment into the substrate. Achieves excellent bond values. Fast drying for project efficiency. Read More add. Available Colors. White. For visual representation only. The final cured color of the product may vary.
Product Details. Application. Documents. Usage. Intended for use in all properly designed working joints with a minimum depth of 1/4 inch. Ideal for horizontal applications. Placeable at temperatures as low as 40 °F. Adheres to most substrates commonly found in construction.
Sikadur® Crack Fix. A two-component, epoxy resin adhesive used to fill non-moving cracks in structural concrete and masonry. Buy Now. Five times stronger than concrete. Convenient easy to use cartridge fits standard caulk gun. Deep, penetrating and tenacious bonding of cracks in structural concrete. No mess - self-mixing.
