epoxy paint specification 相關
廣告Roofing, Concrete Repair Supplies, And Many Other Products At Affordable Prices. Get Quick, Low-Cost Shipping Anywhere, Today. Shop Now!
搜尋結果
其他人也問了
What is Nippon Paint EP-02 epoxy floor finish?
What a special specification should be prepared for epoxy coating?
Can epoxy paint be used on concrete?
What tensile strength is required for epoxy coating?
Nippon Paint ZF-F915 Epoxy Floor Finish is a two-component high performance solvent-free amine-adduct cured epoxy coating designed for the protection of the internal masonry surfaces such as concrete floor. It is suitable for light traffic and can
Nippon Paint EP-03 Epoxy Floor Finish is a two-component high performance solvent-free amine-adduct cured epoxy self-leveling coating designed for the protection of the internal masonry surfaces such as concrete floor. It is suitable for heavy traffic and can also be used as a dust-proof floor coating. Interiors.
- Preliminary Information
- Reinforced Concrete Surfaces on Which Epoxy Coating Application
- Temperature and Humidity
- Surface Preparation
- Epoxy Primer Application
- Epoxy Paint Topcoat Application
- Surface Repair
Thephrase “general” in the specification name; Depending on the original conditions of the application surface and the facility, it has been placed due to the availability of different epoxy paint system options. The finished surface may be slightly rough or sandy rough, and the finishing conditions of the surfaces may be different. Since these and...
Will be applied : In the reinforced concrete floor where epoxy coating will be applied, the concrete compressive strength must be at least 25 N / mm 2 and the concrete surface tensile strength must be at least 1.5 N / mm 2 . Tensile strength will be made with a tensile tester (Pull Off Tensile Tester). While the field concrete is poured, tensile st...
Forepoxy coating application, the ambient and concrete surface temperature must be between + 10 ° C and + 30 ° C. The concrete moisture rate should be 4% by weight unconditionally and the relative humidity in the environment should be less than 80%. Relative humidity; It must be below the “Condensation Temperature”, also known as the dew point. Con...
In reinforced concrete floors suitable for epoxy coating; Surface preparation is made in order to remove possible loose particles, weak slurry layer, oil and dirt layer, if any, and roughen and clean the surface. Epoxy coating surface preparation should be done with a vacuum ball blasting machine (Shot Blasting-Blastrac). Traditionally, marble poli...
Gerekli yüzey hazırlığı, temizliği ve tamiratları yapılmış, minimum nem koşullarını sağlayan betonarme yüzey, epoksi astar uygulamasına hazırdır. Uygulamada kullanılacak diğer malzemeler gibi epoksi astar da solventsiz olacaktır. Epoksi malzeme hazırlanırken önce A bileşeni (epoksi reçine) düşük devirli karıştırıcı ile karıştırılacak, karıştırma iş...
After the epoxy primer application, the surfaces will be protected from moisture, dust and air flow. It will not be opened to pedestrian or vehicle traffic in any way. Depending on the weather and ambient temperature, solvent-free epoxy paint will be applied as a top coat 8-24 hours after the intermediate coat application. Before the application, i...
If there are pits, fractures and cracks on the reinforced concrete surface, segregations are made with epoxy primer and epoxy mortar. If the cracks are deeper than 4-5 mm and have a large area, cement-based repair mortars may also be preferred. If there is a danger of water coming from the floor, the option of filling the crack section by epoxy inj...
EP9000 Camel Epoxy Enamel. Coating Calculator. applicable : Suitable for surfaces of wood, metal and fibre-glass, etc. where excellent chemical resistance is required. Also good for water tanks, swimming pools and floorings against corrosion. features : Excellent adhesion. Excellent resistance to abrasion and impact. Excellent chemical resistance.
- 4L (Two-piece-pack) & 18L (Two-piece-pack)
- High Gloss
- 18 m²/ltr./coat
DESCRIPTION. 2 pack Epoxy-polyamide based high performance epoxy paint with high gloss and durable finish. It is resistant to most general household chemicals & oils. This can be applied on concrete/cement or metal surfaces, Recommended as a top coat on household, light duty commercial & industrial floors.
Features. • Tough finish. • Dust-proof property. • Excellent abrasion resistance. Read More. General Specification. Size. Technical. Coating. Buy the Best Quality Nippon Paint EP-02 Epoxy Floor Finish product from Nippon Paint Only on Archify Hongkong.
Home > Products > Flooring > 162 AquaPro Epoxy Paint back search product search 162 AquaPro Epoxy Paint ... Product Specification Material Safety Data Sheet MA338 Camel Non-skid Sand see also : EP9000 Camel ...
